Via Epia CN10000EG

From Gentoo-en
Jump to: navigation, search

Introduction

The Epia SP8000E is a mini-ITX form-factor motherboard from VIA Technologies featuring an embedded processor. The board is designed for low power, low noise operation.

Specification

CPU

  • 1.0GHz Fanless VIA C7 Processor (VIA Esther)

Chipset

  • VIA CN700 north bridge
  • VIA VT8237R Plus south bridge

Graphics

  • Integrated VIA UniChrome Pro AGP Graphics with MPEG-2 Decoding Acceleration

Audio

  • VIA VT1618 Muliti-channel AC’97 Codec

Memory

  • 1x DDR2 533 DIMM socket (1GB max)

Expansion Slot

  • 1x PCI slot

IDE

  • 2 x UltraDMA 133/100/66 Connectors

LAN

  • 1 x VIA VT6103 10/100 Mbps Ethernet PHY

TV-Out

  • VIA VT1625M HDTV Encoder

Back Panel I/O Ports

  • 1 x PS2 mouse port
  • 1 x PS2 keyboard port
  • 1 x VGA port
  • 1 x Serial port
  • 1 x RJ-45 LAN port
  • 4 x USB 2.0 ports
  • 1 x RCA port (S/PDIF or TV out)
  • 1 x S-Video port
  • 3 x Audio jacks: Line-out, Line-in and Mic-in (Horizontal, Smart 5.1 support)

Onboard I/O Connectors

  • 1x USB connectors for 4 additional USB 2.0 ports
  • 2x SATA connectors
  • 1x LPT connector
  • 1x CD in connector
  • 1 x CIR connector (switchable for KB/MS)
  • 1 x Front panel connector
  • 1 x Front panel audio connector for Line-out and Mic-in
  • 2 x Fan connectors for CPU and system fans
  • 1 x ATX power connector

BIOS

  • Award BIOS - LPC 4/8Mbit flash memory

System Monitoring and Management

  • CPU voltage monitoring
  • Wake-on LAN, Keyboard Power-on, Timer Power-on
  • System power management
  • AC power failure recovery

Form Factor

  • Mini-ITX (4 layers)
  • 17cm x 17cm


lspci Output

Code: lspci
00:00.0 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.1 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.2 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.3 Host bridge: VIA Technologies, Inc. PT890 Host Bridge
00:00.4 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:00.7 Host bridge: VIA Technologies, Inc. CN700/VN800/P4M800CE/Pro Host Bridge
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge
00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81)
00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [KT600/K8T800/K8T890 South]
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 78)
01:00.0 VGA compatible controller: VIA Technologies, Inc. UniChrome Pro IGP (rev 01)

make.conf Settings

The following flags should be safe to use:

Code: /etc/make.conf
CFLAGS="-O2 -mtune=i686 -msse -msse2 -msse3 -mmmx -mfpmath=sse -pipe -fomit-frame-pointer"
CXXFLAGS="-O2 -mtune=i686 -pipe"
CHOST="i686-pc-linux-gnu"


Links

Via's Website of Motherboard